How To Install Garage Door Hardware

Let’s say it as it is garage doors can be boring. Instead of looking at the garage door as a large dull slab made of aluminum, wood, or fiberglass, think of the door as an empty canvas that is begging to be touched by an artist. This guide for installing doors for garages, virtually anyone with a few tools and a free time can become an artist.

Hardware for garage doors is about adding a touch of elegance to the look of your entrance without having to spend an enormous amount of dollars. Although they could appear as straightforward hardware for garage doors, they are actually quite useful ornaments but there are a few situations where installing this type of hardware could make a significant impact.

For instance, houses in various developments tend to appear very similar. Moreover, homeowners might think it is time to break away from the norm. In such cases, well-lit garage doors are a great location to display a little of personality and style with simple, elegant upgrades such as handles and hinges.

In addition installing decorative garage door hardware can be a fantastic idea prior to listing your home for sale. The curb appeal is a selling point and giving that bare and dull slab to conceal the garage’s contents with a fresh look could help make the house sell more quickly and for a higher price to what the seller is asking.

For those with garage doors in good condition but are simply boring the addition of decorative hardware could make all the difference. A handle, some faux hinges , and even locks can appear more polished.

Safety Beware of

The majority of the time the installation of garage door hardware can be secure. There’s usually no threatening chemicalsand because the modern doors are mainly used for display purposes the parts are lightweight and simple to use. However, it’s essential to use the appropriate safety equipment.

When working with a drill that has tiny bits there’s always the chance that the bit could snap when it’s under pressure. If it happens, fractured bit’s trajectory is a little unpredictable and DIYers must put on safety spectacles to protect themselves from the risk of sustaining eye injuries. Wearing gloves is also recommended, since they will protect you from damage caused by flying bits and the scrapes and blisters which are commonplace in DIY projects.

Tools

  • Tape measures
  • The Level (bubble or laser)
  • Pencil
  • Drill
  • Drill bits
  • Screwdriver

Materials

  • Decorative garage door hardware (hinges, handles etc.)

Instructions

1. Map the Hinge Locations on the Map

Begin by selecting the hinges’ places. On the majority of four-panel garage doors, hinge straps work best when there is one in between the first and second panels and one between the 4th and 5th panels on either side. Be sure to avoid installing hinges in areas where they could overlap the edge of two panels.

The pencil should be poked through the screw hole of the bracket and leave small marks upon the door. Take the hinge off, place the bubble level over the mark, then draw a line that is level across your garage door. You can also set the laser level so that it is positioned at the point. Place the hinge on the mark and mark the screw holes.

Repeat this procedure at every hinge location.

2. The Screw Holes are to be drilled.

With the marks created in the first step, make small holes into the shell on the outside that is the door to your garage. Follow the directions of the manufacturer to determine the proper size of the drill. For doors made of aluminum or fiberglass ensure that you start slowly and stop when the bit has broken through the surface in order to avoid the damage of drilling an area that is larger than what is needed. For doors made of wood, drill as deep as the screws included in the kit.

3. Install the Hinges

Once all the holes are that have been made, put the hinges in place using the hardware provided with the set. Make sure that you secure the screws using the help of a screwdriver in order to avoid damaging doors or the screw’s head. Do not overtighten.

4. Take a measurement and mark the center of the Door

Find out the desired height of the handle. For handles that are vertical it is usually at center of third or second panel. For handles that are horizontal typically, it is towards the lower part of the first panel.

Make use of measuring tape to locate the closest point to the middle of your door, from right to left. Then draw a tiny pencil line. Utilize the laser or bubble level in drawing a plumb vertical line along this mark, and around the desired size of the handle. Set the handle of the door on the marker and then mark screw holes.

5. Drill the Holes and then install the Handle

Following the same procedure as previously, drill tiny holes around the marks created at the end of the process making sure to stop the bit when it is able to penetrate the door. Once the holes have been drilled then, attach the handle with an screwdriver to stop injury from tightening too much.

Previous Post
Next Post

Leave a Reply

Your email address will not be published. Required fields are marked *