What Happens During the Fire Damage Restoration Process?

A fire at home or in a business is a major challenge to manage since the damage is massive and can be extremely disrupting your day. There is a feeling of relief when the fire has been put out and all is well however the destruction is just beginning. The fires produce corrosive byproducts as they ignite synthetic materials. these byproducts, in addition to smoke and soot, cause significant damage to furnishings and surfaces. The destruction often extends to areas that the fire itself could not penetrate and that’s why you must start the restoration of the fire damage when the fire department has cleared your home.

We hope you’ve never been confronted with major fire-related damage to your property and you might be asking what exactly is the restoration of fire damage? The process of restoring fire damage is the procedure by the way that damage caused by smoke, fire, or other corrosive byproducts are repaired and repaired. The process involves removing the corrosion of furniture and surfaces caused by soot or other byproducts and fumes from smoke. Restoration of fire damage is a complicated process that includes the steps below:

  • Inspecting the Damage

The professionals who deal with fire damage start by carefully evaluating the property in order to note the damages caused by smoke, fire, and soot. They also check for water damage that may occur after the fire is put out. After they have evaluated any damage they start the process of restoring.

  • Content Cleaning and Removal

Things that are damaged like appliances, furniture, and personal items will be taken away from the house through Fire Damage Restoration experts. The experts can determine whether a specific object is salvageable or has been irreparably damaged. All items that are able to be saved are emptied and transported to an off-site location where they will be cleaned thoroughly and repaired.

  • Property Stabilization

A fire at home can cause substantial damage to the structural foundation and the roof of a home and leaves it vulnerable and susceptible to further harm from storms or from vandalism. Restoration experts can help secure your home by using roofing tarping and board-up services to make sure it stays in place through the process of restoration.

  • Water Damage Restoration and Drying

After securing the property the fire damage restoration experts take away the water that caused the fire and fix any damage that has resulted. They clean the areas affected with drying and dehumidification equipment in order to keep out the mold as well as other issues.

  • Soot and Smoke Damage Restoration

In this phase of Fire Damage Restoration, technicians eliminate tarnishing that is caused by corrosive byproducts and soot with the help of powerful cleaning agents. They are able to get rid of soot from your ceiling, wall countertops, walls, and other surfaces and items all over your house. The removal of smoke odors is an aspect of this process because the technicians use sophisticated equipment, such as the hydroxyl process and ozone generators to eliminate the smell.

  • Thorough Cleaning and Disinfection

When the majority of destruction caused by fire, water, and soot is dealt with firefighters will thoroughly cleanse and disinfect your house. The cleaning will include structural components as well as furniture, appliances, and other objects that are covered in dust or debris.

  • Final Restoration

The final stage of the Fire Damage Restoration process is to repair the damage to restore your home to its original state. This involves reconstruction of structural elements that have been damaged, renovation painting, and the installation of brand-new drywall, flooring, or carpeting. Certain restoration companies for fire damage provide full reconstruction services, but others can only make specific repairs and then suggest you to another expert more suited to manage the repairs.

If your house is ever damaged by a fire, be sure to begin the process of restoring the damage when the fire department allows it. Repair specialists for fire damage who are IICRC certified can efficiently restore your home and save items affected by the smoke or fire. The method that was described above has been verified to restore you back to your original state after being damaged in an incident fire.

Fire Damage Restoration Service

Types of Damage to Expect After a Fire is Extinguished:

  • Soot is the carbon byproduct of burning materials. It can produce acid and do lots of damage to surfaces that are porous and rough. Wood, stone, grout carpet, and textiles are especially vulnerable.
  • Mold thrives in dark, damp places and is typically found in homes after the fire. When the humidity in the air combines with mold spores and mold, it develops mildew, which can cause damage to porous materials.
  • Rust: It will corrode your metal objects, causing them to be irreparable or increasing the danger of electroshocks on electrical devices.
  • Odor: Following the fire has raged, the combination of mildew and smoke produces an unpleasant smell.

Why Should You Hire Fire Damage Professionals?

When a fire catastrophe has struck your house You must get to the scene quickly and contact the experts. Only trained personnel are permitted to enter a fire scene, even if the fire’s damage isn’t too severe and the cleanup needs to be delegated to licensed and skilled technicians. Why? Because fire damage is unpredictable No two fires can result in their mark on the structures of building exactly identical.

Steps to Take When Assessing and Repairing Damage:

  • Assess structural damage

When the structural issue has been evaluated, any obvious cracks or entry points have to be repaired. This is referring to gaps in ceilings, shattered windows, or doors that are missing.

  • Look for further damage

It’s not just obvious damages (from fire and smoke) that the professionals from Weof Miami are looking for, but using water to extinguish the fire could cause mold and structural damage as well.

  • Removal of debris

The cleanup of the debris has to be done quickly to lessen the amount of smoke odor. When there is a large fire it is necessary to remove and pack away personal belongings to keep their destruction and to prevent recontamination.

Removal of water

The water that is standing needs to be removed and since water can soak into the surfaces that absorb water (walls floors, floorboards and may even soak down to the next level of multi-story buildings) air movers should be utilized to speed up drying.

  • Deep cleaning

However, not all things are able to be saved. Professional products can clean surfaces and eliminate the smell, but it can be very laborious and sometimes replacement is an option.

Specialized Equipment Needed for Cleanup:

Air scrubbers: Remove harmful substances from the air with an air filtration system, and later emit the scrubbed air. The area of the scrubber and the density of the smoke will determine the length of time the scrubber must operate.

  • Air movers: Pull air through an intake, and then direct it out through an outlet – much like hairdryers. They are ideal to dry floors, walls carpets, furniture, and other surfaces. They force air over damp surfaces or those that are damp, bringing moisture into the stream, and taking it away from the surface.
  • Dehumidifiers: Remove humidity from the air. when air is moved through the dehumidifier, a cooling coil creates a condensing effect and causes water to accumulate inside the unit. Without dehumidifier water that an air-mover is collecting from an object is going to be released into the air and eventually condense on a different surface.

After cleanup is completed by Weof Miami Weof Miami, you can count on to be rid of any evidence of smoke, fire as well as water-related damage. It will also be clean of odors and surfaces will be clean and stain-free, while furniture will be repaired or replaced. We will also make sure that all damage that is not visible is dealt with, including burned electrical points or plumbing fixtures, as well as mold.

FIRE DAMAGE RESTORATION PROCESS STEPS

  • Formulate a Restoration Plan
  • Secure the Facility
  • Water Extraction
  • Demolition and Debris Removal
  • Soot Removal and Smoke Damage Mitigation
  • Repairs and Restoration
  • Renovation

According to the U.S. Fire Administration, commercial, or non-residential fires cause billions of dollars in property damage to commercial, industrial, and manufacturing facilities every year. While a good fire safety plan can save lives, it is just as important for your property manager or facilities manager to know who to call when the fire is out and the fire trucks have left. For best results in salvaging and restoring safety and function to your facility, the fire damage restoration process should begin as quickly as possible.

Water and fire damage restoration projects are incredibly complex, and in commercial construction, it takes an experienced eye to spot the real problems, see how things are connected, and assess how deep the damage really goes.

Fire Damage Restoration Cost

The cost of business interruption and the possible loss of long-standing customers and/or tenants make it imperative to expedite the fire damage restoration process. In many situations, we can complete fire damage restoration in one party of your facility with minimal disruption to the people who use another area of the building.

  1. WHEN WE FIRST ARRIVE

We offer 24-hour emergency services, so you can call us day or night, whenever the fire is out. When you call we will respond immediately, and quickly assess the extent of the damage. We will then formulate a fire damage restoration plan, and get to work. You can depend on us to get the work done fast and get it done right.

  1. SAFETY FIRST

Once we have done our assessment and damage evaluation, we will take the necessary steps to secure your facility, and prevent further problems. This can include:

  • Installing Security and Temporary Fencing
  • Temporary Board Up and Roof Cover-Up
  • Bracing to Maintain Structural Integrity
  • And more
  1. WATER EXTRACTION AND STRUCTURAL DRYING

Whether your sprinklers went off and drenched everything, or firefighters spent hours fighting the fire, the first concrete step towards fire damage restoration is getting rid of the water and drying everything out. This will help prevent any further water damage and mold growth. If you or our team sees evidence of mold, we can take care of it, as we are also experienced in mold remediation.

  1. DEMOLITION AND DEBRIS REMOVAL

Once everything is dry, we will begin any demolition and debris removal that is necessary to begin repairs. We only remove irreparably damaged construction materials, furniture, and other items. Anything structural that we can repair or restore, we will.

  1. SOOT REMOVAL AND SMOKE DAMAGE MITIGATION

In some instances, soot removal and repainting or refinishing are all you need in any areas of your building that were not damaged by the fire. If the blaze was contained to one portion of your facility, it’s likely that you have soot and smoke damage to other areas. Our team will do a smoke damage evaluation and perform structural cleaning and odor control. Before repainting any walls, ceiling, or trim not damaged by fire, we will scrub and sand before priming and painting to ensure the paint job lasts for years to come.

  1. REPAIRS AND RESTORATION

Once all of the above steps are complete, we begin structural repairs and restoration. Since 1988, we’ve built a reputation for performing highly complex fire damage restoration and construction projects with speed, responsiveness, and quality while delivering great value. We are skilled in all areas of commercial construction, including carpentry, roofing, plumbing, electrical wiring, HVAC, painting, etc. We’ve solved unique commercial construction challenges for thousands of properties in categories such as:

  • Healthcare
  • Hospitality
  • Government
  • Multifamily
  • Education
  • Commercial Offices
  • Senior Living
  • Religious Institutions
  1. RENOVATION

There are many reasons to use the devastation of fire as a starting point for a full renovation. Perhaps your facility was due for an upgrade anyway. Rather than restoring things to the same conditions, you may decide to use this chance to reconfigure spaces, expand with a new addition, add a fire sprinkler system, etc.

Previous Post
Next Post

Leave a Reply

Your email address will not be published.