Five Reasons Your Bathroom Smells Like a Sewer

If your bathroom has a smell that resembles a sewer then it’s time to look for the source and correct it.

Have you ever walked into a bathroom and thought phewee was that smell?

Bathrooms should be clean and tidy however, they may emit a strong odor. These are the top five reasons why your bathroom is smelling like a sewer and what can be done to eliminate the scent.

Five reasons why your bathroom smells like a sewer

1. Dry Floor Rubbish

A dry floor waste is typically the main reason that your bathroom smells as a sewer because it’s literally letting the sewer gases escape through the hole within the flooring.

This floor drain is just a drain that is grated located in the middle of your bathroom. The grate can be taken off and a torch can be used to inspect the water seal on the bottom of the waste. If there isn’t any water in the bottom of the drain, the floor waste is dry, and allowing sewer odors to rise to the bathroom.

It’s an easy fix and involves running water down the bath, shower or basin in order to restore the water seal. If the water doesn’t sit at the bottom of the trap, and you are living in Jumeirah, you’ll need a Emergency Plumber in Jumeirah to investigate why.

When the waste on your floor is situated in a bathroom that is intended for storage and storage, fill a bucket water and then pour it down the grille. The shower waste needs to be sealed by water therefore, make sure to check this when you inspect for floor debris.

2. Fixed traps are blocked up

There’s a trap underneath your bathtub, basin, and shower. This can accumulate with the congealed wastes that are formed of soap, toothpaste, and hair. The bacteria in the trap could cause an unpleasant smell in the bathroom.

There are a few ways to address this.

Another option is to use a natural cleaner to remove the smell. Another is it to use the drain cleaning machine to provide thorough cleaning. For a basin waste replacement, replace the basin trap including the waste plug as well as the plug.

3. Rubber seal that has worn off on toilet pan connector

An unconcealed toilet trap has rubber seals on the pan connector of the toilet. Plumbers are familiar with this as”the collar of the pan.

Sometimes the seal’s rubber deteriorates over time allowing sewer gases release into the air. It’s best to consult an experienced Toilet Plumbing Jumeirah to repair this problem as they’ll need to replace the seal, which implies that the toilet must be removed.

If the toilet pan is difficult to take off the plumber could mould an epoxy sealing agent (like Ferope) on the pan, thereby creating a seal. In certain situations, the entire pan connector is able to be changed.

It’s less apparent with the concealed pans for toilets. Have a sniff around the toilet area to determine if the smell is coming from the toilet.

4. Airflow is not adequate

A steamy bathroom provides the ideal environment for mould and mildew to develop.

The most effective way to prevent mould on plasterboard walls or on the ceiling is to leave windows open during showers or using the exhaust fan so that it can draw up the steam.

It can also result due to a slow leak of water in the bathroom wall. It is recommended to call a Local Plumbing Company Jumeirah to locate the leak’s source and fix it to prevent more growth as this can cause health hazards.

5. Partially blocked toilet

A toilet that has been blocked for a long time will smell. A plunge into the toilet by yourself will clear the toilet, however, should it not work, a plumber will need to be contacted with an appliance to clean the drain to remove the obstruction.

Previous Post
Next Post

Leave a Reply

Your email address will not be published. Required fields are marked *