Be Aware Of How To Remove A Key Stuck in A Lock

There are several reasons you might want to be aware of how to remove a key stuck in a lock.

Maybe you lost the key and the lock is a good entry point for burglars. Or maybe you own a property and recently removed a tenant and need to keep the door closed until you get a new lock your lock.

Sometimes, a criminal ends in possession of a key and you’re liable for the consequences until you can switch the lock. You can deactivate or remove it so that it renders it permanently locked instead of being unlocked. What is the best way to do that?

There are a few ways to break a lock when you’re in a hurry. Make sure you have the lock replaced in the event that you want to make use of it again. Only permanently disable the lock only if you’re prepared to take this step or if you’re planning on not using it ever again. At Oklahoma City Locksmith Order you can find the best High Security Door Lock Repair Services, which are quick and professional. Oklahoma City Locksmith Order is available any time of the day to fix broken security locks for you.

Be aware that a functioning door is essential to ensure fire safety, so be sure this door doesn’t lead to a place that will have people in it before you can get your locks repaired.

Here’s how to obtain the key stuck in locks or become disabled:

  1. Products
  2. Jam The Lock
  3. Liquids
  4. Mess With The Lock
  5. Play with the Door


There are products designed to stop a lock from working, either temporary or permanently. If you’re interested in knowing how to make a key stuck in locks and you’re looking for the best options to go about it. They can be used by anyone to figure out how to get a key stuck in a lock with ease.

1. Key for Lockout

Most commonly, it is an entry key. These are essentially just key blanks that were cut horizontally across the middle. The key is inserted into the hole, and then pull off the top layer. The bottom half is caught in the lock. To remove the bottom half take the top piece and pull the two pieces out at once.

This is the most common way people know how to get an unlocked key into the lock. The issue is that anything you put in the top of the lock will pull the bottom of the lock out. You could use a paperclip or Bobby pin. Of course, the majority of people aren’t aware of that, and anyone you’re keeping out may be unaware of this, but it’s worth keeping in your thoughts.

2. Keyhole Lock

Keyhole locks can be bought online or at home supply stores. These block the keyway, and require an second key to open and take them off. This strategy won’t help against an armed lockpicker, but it’ll block someone who has the key from making use of it.

3. Kill Key

Finally, you can get the “kill key.” These are keys that you purposely break inside the lock. They’re designed to be difficult to remove using a broken key extractor. The only method to remove them is to remove everything. But with some skill you can make them can be removable.

Blocking The Lock

In the lock can cause it to become jammed in a way that’s generally only reversible once you have removed the lock. If you’re getting the lock replaced it’s possible to clog it with anything that fits. If you are facing difficulties, you can hire Oklahoma City Locksmith Order who offers Professional And Affordable Servicesto clients in Oklahoma City who require Change Door Lock Oklahoma City. You don’t necessarily need to know how you can get a key stuck in locks. Here are a few possible alternatives from the many.

1. Toothpicks

Toothpicks are excellent because they are able to be put in the lock and then break them out of. Based on the size of the lock that you have, you could try it using just the use of just one or an entire bunch of them. Once inside, you’ll be in a position to cut them off on the outsideto make them harder to remove.

If you don’t wish for the toothpick to become easily extracted it is also possible to take a small portion of a toothpick before employing a second toothpick and pushing it into the back of the lock. By doing this, you can stop a key from fitting, and the user might not even be aware of the reason.

2. Paper

Paper is another item that could be inserted into the lock easily, but without being very extractable. You can cut off tiny strips or fold an entire piece of paper. Make use of the key or something thin and small, like a toothpick, paper clip, or bobby pin, to put the paper strips in the back of the lock and secure it.

3. Cut The Key Off

If you have a duplicate of the real key, you may also cut the tip of it off. So, the point should be stuck within. Doing this might take a bit of work but there are more efficient methods than. This method is efficient if you’re looking into the best way to get keys stuck inside a lock, however.


There are sprays you can apply to your keyholes to jam it up for good without having to find out how to get the key stuck in a lock. Similar to everything else, you’ll require an upgrade to your lock after you’ve used one of these.

1. Caulk

An obvious one is a caulk, which fills holes. After filling your keyhole with caulk, you’ll likely want scrape any remaining caulk off using a putty knife to ensure it doesn’t spill all over the place. Use the usual caulk procedure for this – it’s just like to caulking other holes.

2. Spray Foam

Another item used to fill gaps is spray foam. It’s just like – spray foam into the open keyhole, and then you cannot put a key in it ever again. It’s as easy as that. Add a key, and you’ll have a reliable method to try out when you want to know what to do to prevent a key from getting stuck in a lock.

3. Glue

With this option, you could approach the process using a variety of methods. You can make use of a hot glue gun to cover your keyhole or make it more delicate. You can coat a paperclip with glue and brush it over the inside of the lock to the top. This will glue all of the pins to position and make sure that the key is useless.

The other option is to simply glue the key inside. This is probably the method you considered when thinking about how to make a key stuck inside the lock.

You can use any glue however, stronger ones are recommended. Gorilla glue or Super Glue is a good choice if you don’t have an electric heated glue gun.

Making Fun of The Lock

There are many ways to break or harm the locking mechanism included in the lock or key to prevent any unlocking. In some cases options, you’ll need competent enough to take it off and access some of the more advanced locking mechanisms. There aren’t all locks that require this level of knowledge however. Here are a few easy strategies you can employ to break the lock.

1. Recut Key

If you have access to the entire key set and are concerned that the person you’re trying to stop may take one then you can cut the key to prevent the lock from working. It’s all you need is a larger groove in any existing cuts to stop it from interfering with the pins correctly. This cut doesn’t need be too deep, only an obvious slope.

It’s not necessary to know how to fix a key in a lock if you could damage the key.

2. Tape The Knob

In order to stop people from opening doors can be as easy as taping down or gluing the knob inside that will unlock the door. If this knob can’t turn it, then the key will not be able to turn and anyone trying to open the door will be stuck.

If you’re using tape ensure you get high-quality duct tape and tape the entire knob to make sure no movement can occur. It is probably better to buy a premium glue for this, and apply it around the knob to stop the knob from rotating. The best option would be to try both at once.

As you will see, glue can be helpful for many things – If you’re looking to learn how to get a key stuck in a lock, prevent the lock’s mechanism from rotating, or jam the lock, you can apply glue.

3. Cut The Spindle

A specific portion of the inside of your lock lets the door work. When you remove the handle, you will locate a hollow shaft that is connected to the lever. If you remove or cut this spindle, your handle will be in no way capable of interacting with the locking mechanism, stopping the mechanism from working in any way.

To cut this piece of metal, you need a metal cutter. If you plan on removing the lock without cutting it, you’re going to have to take apart most of the lock before you put it back in place. To do this in a proper manner, you’ll must know the various parts of a locking and how to put them together.

Adjust The Door

If you aren’t keen to open the locks, there are options to alter the door to keep its opening. Many mechanisms allow the door to open and function properly, including the hinges and strike plate, so all you need to do is stop or modify these mechanisms to stop that door from being opened.

1. Rod In Track

It is possible to place an iron rod or another obstruction in the track of your door. This is enough to stop the door from opening. A rod that is long is the most effective item since the door will move it along the track and then get stuck fast. It is not necessary to know how to stop a key from getting stuck inside a lock, if you can get something other stuck in the way.

2. 2×4 To Jamb

If you’re trying to secure a sliding door, all you need to do is put an additional 2×4 over the door jamb to keep it from sliding. You could also use any other sufficiently large or weighty object to avoid sliding and get a stuck sliding door. You can stop the door by blocking the door jamb. In addition, you do not necessarily need to know how to get the keys stuck in the lock.

Previous Post
Next Post

Leave a Reply

Your email address will not be published. Required fields are marked *